(806) 542-2100

Best Epoxy Flooring Contractors & Installation in Amarillo, TX

Searching for the best epoxy flooring contractors near you? Amarillo Epoxy Floor connects you with local installers for epoxy floor installation in homes and businesses across Amarillo, Canyon, Bushland, Happy, Claude and Hereford and the rest of the Texas Panhandle.

Get Your Free Quote

Epoxy flooring installation for every space

Garage floors
Basement floors
Commercial floors for offices, retail, and showrooms
Industrial floors for warehouses and shops
Commercial kitchen and restaurant floors
Pool deck and patio coatings

See all epoxy floor services in Amarillo.

Residential and commercial epoxy flooring contractors

The right contractor depends on the space. A crew that does great garage floors may not be set up for a busy restaurant kitchen, so match the contractor to the job.

Homes: garages, basements and patios

Residential work is mostly garages, plus basements, patios and pool decks. Flake (chip) systems with a UV-stable topcoat are common in garages. Basements need careful moisture testing, and outdoor slabs need a UV-stable topcoat and slip resistance.

Retail, offices and showrooms

Customer-facing floors often use solid-color epoxy, flake, quartz or metallic epoxy for appearance, with a tough topcoat. Downtime and odor are big concerns, so ask how the contractor phases the work.

Warehouses, shops and industrial floors

Industrial floors face forklifts, pallet jacks, dropped parts and chemicals. Contractors may recommend thicker 100% solids epoxy, quartz broadcast for grip, chemical-resistant topcoats and line striping for aisles and safety zones.

Commercial kitchens and restaurants

Kitchens deal with hot water washdowns, grease and constant wet floors. Contractors may suggest urethane cement or another system made for heat and moisture, with a slip-resistant texture, coved base along the walls and careful work around floor drains. Ask whether the system meets your inspector's requirements.

Epoxy flooring systems contractors install

System	Common uses	Ask about
100% solids epoxy	Garages, shops, warehouses	Mil thickness and UV topcoat
Flake (chip) broadcast	Garages, showrooms, locker rooms	Full or partial broadcast
Quartz broadcast	Kitchens, restrooms, workshops	Texture level for slip resistance
Metallic epoxy	Showrooms, offices, interiors	Scratch resistance and topcoat
Polyaspartic / polyurea	Topcoats, fast-return floors, sunny areas	Working time and cure schedule
Urethane cement	Commercial kitchens, food and beverage spaces	Heat, washdown and drain details

How epoxy floor installation works

Inspection and moisture check of the slab.
Diamond grinding to open the concrete so the coating bonds.
Crack, spall, and joint repair, ground flush.
Base coat, solid color or broadcast with decorative flakes.
Clear topcoat, often a UV-stable polyaspartic, with optional anti-slip additive.

How to choose an epoxy flooring contractor

Are you insured, and can you show proof? Ask whether the city or county requires any registration for this work, and ask for proof of insurance.
How will you prepare the slab: diamond grinding or acid etching?
Which products are in the base coat and topcoat, and how thick?
How do you handle cracks, moisture, slab temperature, and local climate?
What warranty comes with the work, and what does it cover?
When can I walk on, and park on, the floor?

Prep standards a good epoxy flooring contractor follows

Moisture testing: the calcium chloride test (ASTM F1869) or relative humidity probes (ASTM F2170), especially on slab-on-grade floors and basements.
Diamond grinding or shot blasting to the Concrete Surface Profile (CSP) the product's data sheet calls for, a scale from the International Concrete Repair Institute.
Crack, spall and joint repair, with a plan for moving joints so the coating does not crack over them.
Old coating removal when a previous coat is peeling or incompatible.

Homeowners who only need a garage can use our garage installer checklist to compare quotes.

Planning around downtime

For a business, the floor schedule can matter as much as the floor. Ask contractors whether they can work in sections, after hours or over a weekend so part of the space stays open. Fast-curing polyaspartic and polyurea systems can shorten the closure, but they have a short working time, so they reward experienced crews. Ask for a written return-to-service schedule based on the manufacturer's data sheet, and read our guide to how long epoxy floors take to cure.

Panhandle conditions contractors plan for

Shops and warehouses with big overhead doors take in wind-blown caliche dust, which acts like sandpaper on a topcoat. Sun through bay doors and storefront glass can amber some epoxies, so UV-stable topcoats matter there. In winter, meltwater and deicer collect near the doors, and freeze-thaw cycles can widen cracks that were not repaired. Experienced contractors plan the system and the prep around all of these.

What to compare in contractor bids

Prep method and target CSP
Moisture test and mitigation plan
Products and mil thickness for every layer
Repairs included, and how joints are handled
Phasing, schedule and return-to-service time
Insurance, warranty and what it covers

For more answers, see our epoxy floor FAQ for Amarillo.

Areas we serve near Amarillo, TX

We connect homeowners and businesses with local installers in Amarillo, Canyon, Bushland, Happy, Claude, Hereford, Panhandle, Fritch, and Dumas, and other communities across the Texas Panhandle.

Frequently asked questions

Do epoxy flooring contractors handle commercial jobs?

Many do. Commercial and industrial floors often need different systems, such as quartz broadcast or chemical-resistant coatings, so describe your space when you request a quote.

Can epoxy go over an older, stained slab?

Usually, after the slab is ground, cleaned, and repaired, and moisture is tested.

What is the difference between epoxy and polyaspartic?

Epoxy is a strong base coat; polyaspartic cures faster and is UV-stable. Learn more on our polyaspartic page.

Can a contractor coat over an existing floor coating?

Sometimes. If the old coating is well bonded and compatible, it may be ground and recoated. If it is peeling, it usually has to be removed first.

Can my business stay open during installation?

Often, partly. Many contractors work in sections, at night or over weekends. Ask for a phased schedule before you sign.

How thick should a commercial epoxy floor be?

It depends on traffic, chemicals and impact. Ask each contractor to list the mil thickness of every layer and the product data sheets they are working from.

Get your free instant quote

Amarillo Epoxy Floor connects you with local installers serving Amarillo and the Texas Panhandle. Tell us about your floor and we will help you get a quote.

Prefer to talk it through? Call (806) 542-2100.

Get Your Free Quote